Vehicle Damage Warnings

CAUTION
This system includes Airbag related repair works. For those corresponding to the repair procedures, read carefully CAUTION items in Airbag System before working and be sure to follow the instructions.

Wear working clothing, including a cap, protective goggles, and protective shoes during operation.

Remove contamination including dirt and corrosion before removal, installation or disassembly.

Keep the disassembled parts in order and protect them from dust or dirt.

Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly and replacement.

Be careful not to burn your hands, because each part on the vehicle is hot after running.

Use SUBARU genuine steering fluid, grease etc. or the equivalent. Do not mix steering fluid, grease etc. with that of another grade or from other manufacturers.

Be sure to tighten fasteners including bolts and nuts to the specified torque.

Place shop jacks or safety stands at the specified points.

Apply steering fluid onto sliding or revolution surfaces before installation.

Before installing O-rings or snap rings, apply sufficient amount of steering fluid to avoid damage and deformation.

Before securing a part on a vise, place cushioning material such as wood blocks, aluminum plate, or shop cloth between the part and the vise.