Removal and Installation

Combination Meter Assembly

REMOVAL

1. Disconnect the ground cable from battery.
2. Set the tilt steering at lowest position.




3. Remove the screws and detach meter visor.




4. Remove the screws of combination meter and pull out the meter toward you.
5. Disconnect the connector in the upper area of combination meter to remove meter.

CAUTION:
- Be careful not to damage the meter or instrument panel.
- Pay particular attention to avoid damaging the meter glass.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- Make sure that electrical connector is connected securely.
- Make sure that each meter operates normally.