With Manufacturer's Scan Tool

CLEAR MEMORY MODE
1. On the [[Main Menu]] display screen, select the {2. Each System Check} and press [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Transmission Control System} and press [YES] key.
3. Press the [YES] key after displayed information of transmission type.
4. On the [[Transmission Diagnosis,> display screen, select the {Clear Memory} and press [YES] key.
5. When the 'Done' end 'Turn Ignition Switch OFF' are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.

NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.