Camshaft Sprocket
Camshaft SprocketREMOVAL
1) Remove the V-belt.
2) Remove the crankshaft pulley.
3) Remove the timing belt cover.
4) Remove the timing belt.
5) Remove the camshaft position sensor.
f) Remove camshaft sprocket No. 2. To lock the camshaft, use ST.
ST 18231 AA010 CAMSHAFT SPROCKET WRENCH
NOTE: Also the CAMSHAFT SPROCKET WRENCH (499207100) can be used.
g) Remove camshaft sprocket No. 1. To lock the camshaft, use ST.
ST 499207400 CAMSHAFT SPROCKET WRENCH
INSTALLATION
1) Install camshaft sprocket No.1. To lock the camshaft, use ST.
ST 499207400 CAMSHAFT SPROCKET WRENCH
Tightening torque: 78 Nm (8.0 kgf-m, 57.9 ft. lbs.)
NOTE: Do not confuse the right and left side camshaft sprockets during installation. The camshaft sprocket No. 2 is identified by a projection used to monitor the camshaft position sensor.
2) Install camshaft sprocket No. 2. To lock the camshaft, use ST.
ST 18231 AA010 CAMSHAFT SPROCKET WRENCH
NOTE: Also the CAMSHAFT SPROCKET WRENCH (499207100) can be used.
Tightening torque: 78 Nm (8.0 kgf-m, 57.9 ft. lbs.)
3) Install the camshaft position sensor.
4) Install the timing belt.
5) Install the timing belt cover.
6) Install the crankshaft pulley.
7) Install the V-belt.
INSPECTION
1) Check the sprocket teeth for abnormal wear and scratches.
2) Make sure there is no free play between sprocket and key.
3) Check the camshaft sprocket notch for sensor for damage and contamination of foreign matter.