Tail Lamp: Service and Repair

Rear Combination Light Assembly

REMOVAL

SEDAN
1. Disconnect the ground terminal from battery.




2. Remove the clips and then detach the trunk rear trim.
3. Remove two bolts.
3. Remove the trunk side trim of rear portion.




4. Remove four nuts and then detach the rear combination light while disconnecting the connector.

WAGON
1. Disconnect the ground terminal from battery.




2. Remove the clips and then detach the rear combination light covers.




3. Remove two bolts.
4. Remove the rear quarter trim.




5. Disconnect the connector and then detach the rear combination light assembly,

INSTALLATION
Install in the reverse order of removal.