Removal and Installation

REMOVAL




1. Disconnect the ground cable from battery.
2. Remove the air cleaner case.
3. Disconnect the accelerator cable (A).




4. Disconnect the cruise control cable (B) (vehicles with cruise control)
5. Disconnect the connectors from idle air control solenoid valve, throttle position sensor and pressure sensor.




6. Disconnect the air by-pass hose from the throttle body.
7. Disconnect the engine coolant hoses (A) from the throttle body.




8. Remove the bolts (B) which install throttle body to the intake manifold.

INSTALLATION

Install in the reverse order of removal.

NOTE: Replace the gaskets with new ones

Tightening torque:
Throttle body: 22 N.m (2.2 kgf-m, 15.9 ft-lb)