Passenger's Airbag Module
Passenger's Airbag ModuleCAUTION: Refer to the "CAUTION" of General Description before handling the airbag module.
REMOVAL
1. Turn the ignition switch OFF.
2. Disconnect the ground terminal from battery, and wait for at least 20 seconds before starting work.
3. Remove the glove box.
4. Detach the airbag connector from the support beam bracket, and then disconnect the airbag connector.
5. Remove the three bolts, and then carefully remove the airbag module.
6. Refer to the "CAUTION" for handling of a removed airbag module.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Do not allow harness and connectors to interfere or get tangled up with other parts.