Operation CHARM: Car repair manuals for everyone.

With Scan Tool

NOTE: This is the only information provided by the manufacturer for displaying and reading trouble codes for this system.

OPERATION
1. Turn the ignition switch ON.







2. Connect the diagnosis terminal (1) to the diagnosis connector (2) terminal No. 1 in the driver's seat lower cover area.
3. Read trouble code by identifying the way the air bag warning light flashes.
The airbag warning light flashes a code corresponding to the faulty parts.
The long segment (1.2 sec on) indicates a "ten", and the short segment (0.3 sec on) indicates a "one".

NOTE:
- "List of Diagnostic Trouble Code"
- "Airbag Warning Light Failure"

4. Turn the ignition switch OFF, and disconnect the diagnosis terminal from the diagnosis connector terminal No 1.
5. Wind the tape around the diagnosis terminal and return it to its original position.