Torque Data

Flywheel (T2) 72 Nm (7.3 kgf-m, 52.8 ft. lbs)




Pressure Plate [Clutch Cover] (T1) 15.7 Nm (1.6 kgf-m, 11.6 ft. lbs)

NOTE:
^ When installing the clutch cover on the flywheel, position the clutch cover so that there is a gap of 120° or more between white paint marks on the flywheel and clutch cover. (white paint marks indicate the directions of residual unbalance.)
^ Note the front and rear of the clutch disc when installing.
^ Temporarily tighten the bolts by hand. Each bolt should be tightened to the specified torque in a crisscross method.



Operating (Slave) Cylinder Mounting bolts (T4) 8 Nm (0.8 kgf-m, 5.8 ft. lbs)
Master Cylinder Mounting nuts (T3) 18 Nm (1.8 kgf-m, 13.0 ft. lbs)
Clutch Pedal Bracket Mount
(T1) 8 Nm (0.8 kgf-m, 5.8 ft. lbs)
(T2) 18 Nm (01.8, 13 ft. lbs)

Clutch Switch 8 Nm (0.8 kgf-m, 5.8 ft. lbs)