Read Current Data

READ CURRENT DATA
1) On the [[Main Menu>, display screen, select the (Each System Check) and press the [YES] key.
2) On the [[System Selection Menu>, display screen, select the (Transmission Control System) and press the [YES] key.
3) Press the [YES] key after displayed the information of transmission type.
4) On the [[Transmission Diagnosis]] display screen, select the (Current Data Display & Save) and press the [YES] key.
5) On the [[Data Display Menu>, display screen, select the (Data Display) and press the [YES] key.
6) Using the scroll key, move the display screen up or down until the desired data is shown.
^ A list of the support data is shown in the following table.





NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.