Seat Belt System

INSPECTION LOCATIONS AFTER A COLLISION

INSPECTION
Check for the following, and then replace with new parts if necessary.
- Center pillar lower garnish is discolored or cracked.
- Wire harness and/or connector is damaged.

OUTER BELT (FRONT)
Check for the following, and replace with new parts if necessary.
- Pretensioner is cracked or deformed.
- Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.

INNER BELT (FRONT)
Check for the following, and replace with new parts if necessary.
- Inner belt is deformed or damaged.
- Seat belt buckle is engaged improperly.

REAR SEAT BELTS

OUTER BELT SIDE (SEDAN)
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.

OUTER BELT CENTER (SEDAN)
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.

INNER BELT (SEDAN)
Check for the following, and replace with new parts if necessary.
- Inner belt is deformed or damaged.
- Seat belt buckle is engaged improperly.

OUTER BELT SIDE (WAGON)
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.

OUTER BELT CENTER (WAGON)
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.

INNER BELT (WAGON)
Check for the following, and replace with new parts if necessary.
- Inner belt is deformed or damaged.
- Seat belt buckle is engaged improperly.