Timing Cover: Service and Repair
Belt CoverREMOVAL
1) Remove the V-belt.
2) Remove the crankshaft pulley.
3) Remove the left-hand belt cover (A).
4) Remove the right-hand belt cover (B).
5) Remove the front belt cover (C).
INSTALLATION
1) Install the front belt cover (C).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
2) Install the right-hand belt cover (B).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
3) Install the left-hand belt cover (A).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
4) Install the crankshaft pulley.
5) Install the V-belt.
INSPECTION
Make sure the cover is not damaged.