Transmission Gear Oil Replacement
Transmission Gear OilREPLACEMENT
1) Pull out oil level gauge.
2) Lift-up the vehicle.
3) Drain the transmission gear oil completely.
CAUTION: Directly after the engine has been running, the transmission gear oil is hot. Be careful not to burn yourself.
NOTE: Tighten the transmission gear oil drain plug after draining transmission gear oil.
Tightening torque:
Gasket (B) (Part No. 803926040) 44 Nm (4.5 kgf-m, 32.5 ft. lbs.)
Gasket (B) (Part No. 803926070) 70 Nm (7.1 kgf-m, 52 ft. lbs.)
4) Lower the vehicle.
5) Pour the gear oil into the gauge hole.
Recommended gear oil: Use GL-5 (SAE: 75W-90) or equivalent.
Gear oil capacity: 3.5 liters (3.7 US quarts 3.1 imp quarts)
6) Check the level of the transmission gear oil.
CAUTION: When inserting the level gauge into transmission gear, align the protrusion on the side of the top part of the level gauge with the notch in the gauge hole.
NOTE: The level should be within the specified range marked on the gauge.