Fuel Tank Pressure Sensor: Service and Repair

REMOVAL

1. Remove the fuel tank.




2. Remove the protector cover.
3. Disconnect the connector from fuel pressure sensor.




4. Release the clips which hold fuel pipes onto fuel tank.




5. Remove the bolt and nut which hold the fuel tank pressure sensor onto the bracket.




6. Disconnect the pressure hose from fuel tank pressure sensor.

INSTALLATION

Install in the reverse order of removal.




Tightening torque: 7.4 N.m (0.75 kgf-m, 5.4 ft-lb)




Tightening torque:
T1: 7.4 N.m (0.75 kgf-m, 5.4 ft-lb)
T2: 4.4 N.m (0.45 kgf-m, 3.3 ft-lb)