Fuel Injector: Service and Repair

Intake Manifold Part 1:

Intake Manifold Part 2:

REMOVAL

RH SIDE

1. Lower the fuel pressure.
2. Open the fuel filler flap lid and remove fuel filler cap.




3. Disconnect the ground cable from battery.
4. Remove the intake manifold.




5. Remove the fuel pipe protector RH.




6. Disconnect the connector from the fuel injector.







7. Remove the bolts which hold the injector pipe to intake manifold.




8. Remove the fuel injector while lifting up the fuel injector pipe.

LH SIDE

1. Lower the fuel pressure.
2. Open the fuel filler flap lid and remove fuel filler cap.




3. Disconnect the ground cable from battery.
4. Remove the intake manifold.




5. Remove the fuel pipe protector LH.




6. Disconnect the connector from the fuel injector.










7. Remove the bolts which hold the injector pipe to intake manifold.




8. Remove the fuel injector while lifting up the fuel injector pipe.

INSTALLATION

RH SIDE

Install in the reverse order of removal.






NOTE: Replace the O-ring and insulators with new ones.




Tightening torque: 19 N.m (1.94 kgf-m, 13.7 ft-lb)




Tightening torque: 19 N.m (1.94 kgf-m, 13.7 ft-lb)




Tightening torque: 19 N.m (1.94 kgf-m, 13.7 ft-lb)

LH SIDE

Install in the reverse order of removal.






NOTE: Replace the O-ring and insulators with new ones.




Tightening torque: 4.9 N.m (0.5 kgf-m, 3.6 ft-lb)




Tightening Torque: 19 N.m (1.94 kgf-m, 13.7 ft-lb)




Tightening torque: 19 N.m (1.94 kgf-m, 13.7 ft-lb)




Tightening torque: 19 N.m (1.94 kgf-m, 13.7 ft-lb)