Inspection Locations After A Collision
Inspection Locations After a CollisionINSPECTION
If the vehicle is involved in a collision on any side, even if it is a slight collision, be sure to check the following system parts.
AIRBAG MODULE (DRIVER)
1. Check for the following, and replace the damaged parts with new parts.
- Airbag module is cracked or deformed.
- Harness and/or connector is cracked, deformed or open. Lead wire is exposed.
- The module surface is fouled with grease, oil, water or cleaning solvent.
2. When installing a new driver's airbag module, check the following. If necessary, install a new air-bag module and steering wheel.
- The steering wheel is in the way, making it difficult to install the airbag module.
- The clearance between the driver's airbag module and steering wheel is not constant.
- When steering wheel deformation in axial and radial directions exceed limits.
Specifications:
Axial direction play A
Less than 6 mm (0.24 in)
Radial direction play L
Less than 17 mm (0.67 in)
AIRBAG MODULE (PASSENGER)
Check for the following, and replace damaged parts with new parts.
- Airbag module is cracked or deformed.
- Harness and/or connector is cracked, deformed or open. Lead wire is exposed.
- Mounting bracket is cracked or deformed.
AIRBAG MODULE (SIDE)
Check for the following, and replace damaged parts with new parts.
- Front seat is damaged or deformed.
- Harness and/or connector is cracked, deformed or open.
- Lead wire is exposed.
AIRBAG CONTROL MODULE
Check for the following, and replace the damaged parts with new parts.
- Control module is cracked or deformed.
- Mounting bracket is cracked or deformed.
- Connector is scratched or deformed.
- Airbag is deployed.
- Side airbag is deployed.