Disassembly and Assembly
Combination Meter AssemblyDISASSEMBLY
CAUTION: Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
1. Disengage claw (F) to remove case (B) from back cover (A).
2. Disengage claw (G) to remove meter glass (E), reflector (D), and window plate (C) from inner case.
3. Pull up claw (A) in portion (B) of printed circuit (C) with combination pliers. Push out speedometer assembly (D) and tachometer assembly (E) using hole (F).
4. Pull up claw in the center of printed circuit (C), and remove printed circuit from case (G).
Bulb Replacement:
BULB REPLACEMENT
ASSEMBLY
Assemble in the reverse order of disassembly.