Supplement

REAR BUMPER

Rear Bumper (Pickup):

REMOVAL

3. PICKUP

CAUTION:
- Handle bumper carefully to avoid damage to bumper face.
- Do not damage body during removal or installation of bumper.
- To avoid damage to bumper, lay removed bumper on sheet spread on the floor. Do not lay it directly on the floor.

1. Remove rear combination light.
2. Remove clip.






3. Remove clip.






4. Remove clip.






5. Remove bumper face.
6. Remove E/A form.






7. Remove bolt and bumper beam.






INSTALLATION

3. PICKUP

CAUTION:
- Handle bumper carefully to avoid damage to bumper face.
- Do not damage body during removal or installation of bumper.

1. Install in the reverse order of removal.
2. Securely fix bumper edge portion (A) to side bracket (B).






Tightening torque: Bumper beam; 95 N.m (9.7 kgf-m, 70 ft-lb)