Front Seat
Front SeatREMOVAL
1. STANDARD
1. Disconnect ground cable from battery.
2. While pressing headrest lock button, remove headrest.
3. Tilt forward backrest.
4. Move seat to full front end.
5. Remove bolt cover at rear end of slide rail.
6. Disconnect side airbag connector under the seat. (Side airbag equipped vehicle)
7. Disconnect connectors of seat heater and seat belt warning. (Seat heater equipped vehicle)
8. Remove two bolts at rear side of seat rail.
9. Move seat to full rear end.
10. Remove two bolts at front side of seat rail.
11. Remove front seat from vehicle.
CAUTION: When removing seat form vehicle, take care not to damage body, seat, or trim.
2. POWER
1. While pressing headrest lock button, remove headrest.
2. Tilt forward backrest.
3. Move seat to full front end.
4. Remove bolt cover at rear end of slide rail.
5. Remove two bolts at rear side of seat rail.
6. Move seat to full rear end.
7. Remove two bolts at front side of seat rail.
8. Disconnect ground cable from battery.
CAUTION:
- Wait for 20 seconds or more after disconnecting the battery.
- The airbag system has a backup power source. The airbag might deploy if you do not wait for 20 seconds or more before starting.
9. Disconnect side airbag connector under the seat. (Side airbag equipped vehicle)
10. Disconnect connectors of seat heater and seat belt warning. (Seat heater equipped vehicle)
11. Remove front seat from vehicle.
CAUTION: When removing seat form vehicle, take care not to damage body, seat, or trim.
INSTALLATION
1. STANDARD
1. Install in the reverse order of removal.
2. Place slide rail rear inner on location bolts (A).
3. Tighten the four bolts of slide rail.
CAUTION: Confirm that seat can move smoothly and be locked securely at any position.
2. POWER
1. Install in the reverse order of removal.
2. Place slide rail rear inner on location bolts (A).
3. Tighten the four bolts of slide rail.
CAUTION: Confirm that seat can move smoothly.
Front Seat Part 1:
Front Seat Part 2:
Torque specifications