Rear Seat

Rear Seat

REMOVAL

1. WAGON




1. Raise the cushion, and then remove bolt covers (A).




2. Remove bolts, and then remove rear seat cushion.
3. Remove headrest.




4. Remove clips (A), and then remove rear floor front mat (B).




5. Remove bolts and nuts of bracket hinge.
6. Remove rear seat backrest.

2. SEDAN




1. Slightly raise front of cushion while pushing down on cushion in the direction of "A". With cushion held in that position, move it forward until it is unhooked.




2. Remove bolts securing lower portion of backrest and then open the center trunk through lid.
3. Lift rear seat backrest and then remove it.

INSTALLATION

1. WAGON
1. Install in the reverse order of removal.

2. SEDAN




1. Hook and fasten the upper-back side of the rear seat backrest to the body hook.




2. Tighten the bolt and install the backrest.




3. Hook and fasten the seat cushion to the hook on the lower part of the rear seat backrest.

Rear Seat (SEDAN):

Rear Seat (WAGON):

Torque specification