Brakes and Traction Control: Service Precautions
CAUTION^ Wear working clothing, including a cap, protective goggles, and protective shoes during operation.
^ Remove contamination including dirt and corrosion before removal, installation or disassembly.
^ Keep the disassembled parts in order and protect them from dust or dirt
^ Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly, and replacement.
^ Be careful not to burn your hands, because each part in the vehicle is hot after running.
^ Use SUBARU genuine grease etc. or the equivalent. Do not mix grease etc. with that of another grade or from other manufacturers.
^ Be sure to tighten fasteners including bolts and nuts to the specified torque.
^ Place shop jacks or safety stands at the specified points.
^ Apply grease onto sliding or revolving surfaces before installation.
^ Before installing O-rings or snap rings, apply sufficient amount of grease to avoid damage and deformation
^ Before securing a part on a vise, place cushioning material such as wood blocks, aluminum plate, or shop cloth between the part and the vise.
^ Do not put fluid on body. If the body is tainted, wash away with water.