Air Vent Grille

Air Vent Grille

REMOVAL

1. AIR VENT GRILLE DRIVER SIDE
1. Disconnect ground cable from battery.
2. Set tilt steering to the lowest position.
3. Disconnect each electrical connector to remove front cover (A) and switch panel (B).
4. Loosen screw (C) to remove center panel (D).




5. Remove meter visor (E).




6. Loosen screws to remove grille.

2. AIR VENT GRILLE PASSENGER SIDE




1. Remove grille using sharp-edged screwdriver.

CAUTION: Wrap screwdriver with vinyl tape to prevent damage to interior parts.

INSTALLATION

Install in the reverse order of removal.

INSPECTION

The direction and amount of air should be adjusted smoothly.

The adjustment should be kept in each position.