Operation CHARM: Car repair manuals for everyone.

Steering: Service Precautions

CAUTION
^ This section includes Airbag related repair works. For those corresponding to the repair procedures, read carefully CAUTION items in AB section before working and be sure to follow the instructions.
^ Wear working clothing, including a cap, protective goggles, and protective shoes during operation.
^ Remove contamination including dirt and corrosion before removal, installation or disassembly.
^ Keep the disassembled parts in order and protect them from dust or dirt.
^ Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly and replacement.
^ Be careful not to burn your hands, because each part on the vehicle is hot after running.
^ Use SUBARU genuine steering fluid, grease etc. or the equivalent. Do not mix steering fluid, grease etc. with that of another grade or from other manufacturers.
^ Be sure to tighten fasteners including bolts and nuts to the specified torque.
^ Place shop jacks or safety stands at the specified points.
^ Apply steering fluid onto sliding or revolution surfaces before installation.
^ Before installing O-rings or snap rings, apply sufficient amount of steering fluid to avoid damage and deformation.
^ Before securing a part on a vise, place cushioning material such as wood blocks, aluminum plate, or shop cloth between the part and the vise.