Lighting - Fog Lamp Lens/Body Replacement

NUMBER: 07-54-05

DATE: 11/21/05

APPLICABILITY:
2000-04MY Legacy Outback;
2003-06MY Baja

SUBJECT:
Front Fog Light Lens & Reflector

INTRODUCTION

The purpose of this bulletin is to inform you that the front fog light lens and body are now available separately from the fog lamp assembly. If the fog light lens and/or body need to be replaced refer to the repair information listed.





PARTS INFORMATION

REPAIR PROCEDURE/INFORMATION

1) Remove the fog lamp assembly; refer to the applicable Service Manual.





2) Remove the three screws from the backside of the fog light assembly (see Figure 1)

3) Remove the bulb and cord. Caution: Do not touch the glass surface of the bulb.





4) Remove aiming screws (see Figure 2). Caution: Be careful not to misplace the springs.





5) Remove screws that secure bracket to fog lamp assembly (See Figure 3).





6) Remove bracket from fog lamp assembly (See Figure 4).

7) Replace lens and body as necessary.

8) Reinstall in reverse order of disassembly.





9) Using the chart shown, check and adjust aiming of fog light.

WARRANTY/CLAIM INFORMATION





For vehicles within the Basic New Car Limited Warranty period, this repair can be claimed using the table.





Disclaimer