Front Door: Service and Repair
FRONT DOOR PANELFront Door Panel:
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the front door trim.
3. Remove the outer mirror assembly.
4. Remove the front sealing cover.
5. Remove the front door glass.
6. Remove the front door regulator and motor.
7. Remove the front door latch assembly.
8. Remove the front outer handle.
9. Remove the front pillar lower trim to disconnect the connector from body harness.
10. Put a wooden block on jack and place jack under door. Support the door with a jack to protect it from damage.
NOTE: When supporting the door with a jack, be careful not to deform the door hinges while working.
11. Remove the checker bolts.
12. Remove the door-side bolts for upper and lower hinges to remove the door.
13. Using the ST, remove the body-side bolts for upper and lower hinges, and remove door hinges.
ST 925610000 DOOR HINGE WRENCH
INSTALLATION
1. Install in the reverse order of removal.
2. Apply grease to the sliding area of door hinges.