Rear Door: Adjustments

REAR DOOR PANEL

ADJUSTMENT

1. Using the ST, loosen the body-side bolts of upper and lower hinges to align the position of rear door panel longitudinally and vertically.






2. Loosen the door-side bolts of upper and lower hinges to align the position of rear door panel vertically and laterally at front-end.






3. Loosen the screw (A) and lightly tap striker (B) using plastic hammer to adjust striker to align the position of front door panel vertically and laterally at the rear end.

CAUTION: Do not use an impact wrench. The welding area on the striker nut plate is easily broken.