Removal and Installation

REMOVAL

1. Disconnect the ground cable from battery.




2. While pressing the headrest lock button, remove the headrest.
3. Tilt forward the backrest.
4. Move the seat to full front end.




5. Remove the bolt cover at rear end of slide rail.




6. Remove the two bolts at rear side of seat rail.
7. Move the seat to full rear end.




8. Remove the two bolts at front side of seat rail.
9. Disconnect the side airbag connector under seat.




10. Disconnect the connector of seat belt warning.
11. Remove the front seat from the vehicle.

INSTALLATION

Install in the reverse order of removal.

Front Seat:

Torque specifications