Without Scan Tool

OPERATION

1. Turn the ignition switch to ON.

Instrument Panel Lower Cover Area:

2. Connect the diagnosis terminal to diagnosis connector terminal No.1 in the instrument panel lower cover area.
3. Read the DTC by identifying the way airbag warning light flashes.
The airbag warning light flashes a code corresponding to the faulty parts.
The long segment (1.2 sec on) indicates a "ten", and the short segment (0.3 sec on) indicates a "one".

NOTE: "List of Diagnostic Trouble Code".
"Airbag Warning Light Failure".

4. Turn the ignition switch to OFF, and disconnect the diagnosis terminal from the diagnosis connector terminal No 1.
5. Wind tape around the diagnosis terminal and return it to its original position.