Rear

Rear Stabilizer

REMOVAL
1) Jack-up the rear part of the vehicle, support it with safety stands (rigid racks).





2) Remove the nut which secures stabilizer link to rear lateral link.





3) Remove the bolt which secure stabilizer to stabilizer bracket.

INSTALLATION





1) Install in the reverse order of removal.

NOTE:
^ Install the bushing while aligning it with paint mark on stabilizer.
^ Ensure that bushing and stabilizer have the same identification colors when installing.

2) Always tighten the rubber bushing location when wheels are in full contact with the ground and vehicle is curb weight.
Tightening torque:
Stabilizer link to rear lateral link 45 Nm (4.6 kgf-m, 33.2 ft. lbs.)
Stabilizer to stabilizer bracket 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)

INSPECTION
1) check the bushing for cracks, fatigue or damage.
2) Check the stabilizer link for deformities or damage.