Body - Rear Liftgate Stay Revision

NUMBER: 12-84-05
DATE: 01/19/05

APPLICABILITY:
2003~05MY Forester

SUBJECT:
Forester Rear Gate Stay

INTRODUCTION





The damping structure for the rear gate stay has been changed from a single to a dual type damper style. The specifications for both types are different. If replacement is necessary, make sure to use the correct stay. The only interchangeability is if both the right and left need to be replaced at the same time. The dual damper style may be used in place of the single style.





PRODUCTION LINE CHANGE

The dual damper stay type was used in production starting in September, 2004.





PART NUMBER INFORMATION

REPAIR PROCEDURES/INFORMATION

Refer to the applicable Service Manual for repair/replacement information.

CLAIM REIMBURSEMENT/WARRANTY INFORMATION

For vehicles within the Basic New Car Limited Warranty period, refer to the Warranty Labor Time Guide for claim information.





Disclaimer