Repair and Diagnosis: Tools and Equipment
RECOMMENDED MATERIALS1. GENERAL
To insure the best performance, always use the specified oil, gasoline, adhesive, sealant, etc. or that of equivalent quality.
2. FUEL
Always use a gasoline of the same or higher octane value than specified in the owner's manual. Ignoring the specifications below will result in damage or poor operation of the engine and fuel injection system. Use the specified gasoline to correct performance.
3. LUBRICANTS
Use either the lubricants in the table or equivalent lubricants. See the table to choose the correct SAE viscosity.
4. FLUID
Use the fluids specified in the table. Do not mix two different kinds or makes of fluid.
5. ENGINE COOLANT
Use genuine engine coolant to protect the engine.
6. REFRIGERANT
Standard air conditioners on Subaru vehicles use HFC134a refrigerant. Do not mix it with other refrigerants. Also, do not use any air compressor oil except for ZXL200PG.
7. GREASE
Use the grease and supplementary lubricants shown in the table.
8. ADHESIVES
Use the adhesives shown in the table, or equivalent.
9. SEAL MATERIAL
Use seal material shown in the table, or equivalent.