Front Door Window Glass: Service and Repair

REMOVAL

1. Remove the front door trim.
2. Remove the front speaker.
3. Remove the sealing cover.
4. Remove the outer mirror assembly.




5. Remove the front end of door weatherstrip and gusset.




6. Remove the stabilizers.




7. Remove the rear end of door weatherstrip and weatherstrip outer.




8. Operate the power window switch to move the glass to position shown in the figure, and then remove the two nuts from service holes.
9. Take out the door glass.

NOTE: Do not turn the regulator in closing direction after removal of the glass. Otherwise gear may be disengaged.

INSTALLATION

1. Install in the reverse order of removal.

CAUTION: Make sure that the glass stay is placed securely in sash.

2. Adjust the front door glass.