Timing Belt Cover
REMOVAL1. Remove the V-belt.
2. Remove the crankshaft pulley.
3. Remove the timing belt cover (LH) (A).
4. Remove the timing belt cover (RH) (B).
5. Remove the front timing belt cover (C).
INSTALLATION
1. Install the front timing belt cover (C).
Tightening torque: 5 Nm (0.5 kgf-cm, 3.6 ft. lbs.)
2. Install the timing belt cover (RH) (B).
Tightening torque: 5 Nm (0.5 kgf-cm, 3.6 ft. lbs.)
3. Install the timing belt cover (LH) (A).
Tightening torque: 5 Nm (0.5 kgf-cm, 3.6 ft. lbs.)
4. Install the crankshaft pulley.
5. Install the V-belt.
INSPECTION
Make sure the cover is not damaged.