Transmission Control Systems: Service Precautions
CAUTIONSupplemental restraint system airbag wiring harness is routed near the driver's control center differential control module.
CAUTION:
^ All airbag system wiring harness and connectors are colored yellow. Do not use the electrical test equipment on these circuits.
^ Be careful not to damage the airbag system wiring harness when performing diagnostics and servicing the driver's control center differential control module.
^ When measuring the voltage or resistance of ECM or each sensor, use a tapered pin with diameter of less than 0.64 mm (0.025 inch) in order to avoid poor contact. Do not insert the pin with diameter of more than 0.65 mm (0.026 inch).