P0065
DTC P0065 - AIR ASSISTED INJECTOR CONTROL RANGE/PERFORMANCEOUTLINE OF DIAGNOSIS
Detect the malfunction of AAI solenoid valve.
Intake manifold pressure (negative pressure) is constant because the throttle valve is fully closed during fuel cut at deceleration. At this time, opening AAI solenoid valve makes the intake manifold pressure larger. For AAI solenoid valve function diagnosis, judge OK or NG by the amount of change of intake manifold pressure when opening and closing the AAI solenoid valve.
COMPONENT DESCRIPTION
ENABLE CONDITION
GENERAL DRIVING CYCLE
Conduct a serial diagnosis during fuel cut at deceleration from approx. 100 km/h (62 MPH).
Be careful for vehicle speed and engine speed. (Diagnosis may not finish if the vehicle speed and engine speed conditions become out of specification.)
DIAGNOSTIC METHOD
Judge NG when the malfunction criteria are completed 2 times in a row. Judge OK and clear the NG if not completed once
DTC CLEAR CONDITION
- When the OK idling cycle is completed 40 times in a row
- When "Clear Memory" was performed
MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle is completed 3 times in a row
- When "Clear Memory" was performed
FAIL SAFE
None
ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)