Operation CHARM: Car repair manuals for everyone.

P1510

DTC P1510 - ISC SOLENOID VALVE SIGNAL #1 CIRCUIT MALFUNCTION (LOW INPUT)

OUTLINE OF DIAGNOSIS
- Detect the open/short circuit of idle air control solenoid valve.
- Judge NG when the output terminal is Low level even though ECM outputs OFF signal.




COMPONENT DESCRIPTION




ENABLE CONDITION

GENERAL DRIVING CYCLE
Perform the diagnosis when starter switch is OFF.

DIAGNOSTIC METHOD




- Abnormality Judgment
Judge NG when the cumulative time until completing the malfunction criteria becomes more than time needed for diagnosis.




- Normality Judgment
Judge OK and clear the NG when the malfunction criteria are completed.

DTC CLEAR CONDITION
- When the OK idling cycle is completed 40 times in a row
- When "Clear Memory" was performed

MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle was completed 3 times in a row
- When "Clear Memory" was performed

FAIL SAFE
- Cut the fuel of all cylinders, #1 cylinder or #1, #2 cylinder according to throttle position, engine speed, vehicle speed.
- ISC closed loop compensation value becomes zero. [ISCCL = 0 (l/min)]

ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)