Rear Finisher Light Assembly

Rear Finisher Light Assembly

REMOVAL

1. SEDAN
1. Disconnect ground cable from battery.
2. Open the trunk lid.
3. Remove cover (A).
4. Disconnect connector (B) from rear finisher light.




5. Remove ten nuts and then detach rear finisher light from trunk lid.

2. WAGON
1. Disconnect ground cable from battery.




2. Remove rear gate trim (A).
3. Disconnect connector from rear finisher light.




4. Remove nuts (A) and then remove rear finisher light from rear gate.

INSTALLATION

Install in the reverse order of removal.