U5/Low Emissions Models

SUBARU SELECT MONITOR (NORMAL MODE)

1. On Main Menu display screen, select the {Each System Check} and press the [YES] key.
2. On System Selection Menu display screen, select the {Engine Control System} and press the [YES] key.
3. Press the [YES] key after the information of engine type is displayed.
4. On Engine Diagnosis display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.
5. On Diagnostic Code(s) Display display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the [YES] key.

NOTE:
- For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
- For details concerning DTC, refer to the List of Diagnostic Trouble Code (DTC)

SUBARU SELECT MONITOR (OBD MODE)

1. On Main Menu display screen, select the {2. Each System Check} and press the [YES] key.
2. On System Selection Menu display screen, select the {Engine Control System} and press the [YES] key.
3. Press the [YES] key after the information of engine type is displayed.
4. On Engine Diagnosis display screen, select the {OBD System} and press the [YES] key.
5. On OBD Menu display screen, select the {Diagnosis Code(s) Display} and press the [YES] key.
6. Make sure that a DTC is shown on display screen.

NOTE:
- For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
- For details concerning DTC, refer to the List of Diagnostic Trouble Code (DTC).