A/T - 5AT Removal/Installation Precaution

SOURCE: Subaru Tech Tips

TITLE: 5AT Transmission Removal/Installation Precaution

APPLIES TO: All models with 5AT A/T

SERVICE TIP:






When you remove and install the 5AT, be extra careful not to break the connector of turbine speed sensor 1 located on the driver's side of the transmission above the transmission dipstick tube. The connector can very easily come in contact with the transmission tunnel and get damaged during transmission removal/ installation. To avoid damage, remove the Turbine Speed Sensor 1 mounting bolt and rotate the sensor 180 degrees. Restore to its original position after the removal and installation has been completed.