Removal and Replacement

REAR BUMPER

Rear Bumper:

REMOVAL

CAUTION:
- Handle bumper carefully to avoid damage to bumper face.
- Do not damage body during removal or installation of bumper.
- To avoid damage to bumper, lay removed bumper on sheet spread on the floor. Do not lay it directly on the floor.

1. Remove rear combination light.
2. Remove clip.






3. Remove clip.






4. Remove clip.






5. Remove bumper face.
6. Remove Bumper energy absorber.






7. Remove bolt and bumper beam.






INSTALLATION

CAUTION:
- Handle bumper carefully to avoid damage to bumper face.
- Do not damage body during removal or installation of bumper.

1. Install in the reverse order of removal.
2. Securely fix bumper edge portion (A) to side bracket (B).






Tightening torque: Refer to "COMPONENT" of "General Description". BUMPER (SEDAN MODEL), COMPONENT, General Description.