Sunroof / Moonroof: Testing and Inspection
INSPECTION1. CHECK FOR MOVEMENT OF SUNSHADE
1. Place a cloth on sunshade edge, and attach a spring scale.
2. Pull spring scale backward, and measure the load to move the sunshade.
Load to move rear sunshade:
Less than 24.5±4.9 N (2.5±O.5 kgf, 5.5±1.1 lb)
NOTE: Considerable load is required to start pulling spring scale, so take a scale reading when it moves smoothly.
3. If the measured value is more than the specified value, check sunroof lid, sunshade and guide rail assembly for improper installation.