Radiator Main Fan and Fan Motor

Radiator and Radiator Fan

Radiator Main Fan and Fan Motor

REMOVAL





1. Disconnect the ground cable from battery.
2. Lift-up the vehicle.
3. Remove the under cover.





4. Disconnect the connector of main fan motor.
5. Lower the vehicle.





6. Remove the air intake duct.
7. Disconnect the overflow hose.
8. Remove the overflow pipe.
9. Remove the reservoir tank.





10. Remove the radiator main fan motor assembly.

INSTALLATION





Install in the reverse order of removal.

NOTE: When the main fan motor assembly cannot be installed as is, loosen the sub fan motor assembly securing bolts to install it.

Tightening torque: 4.9 Nm (0.50 kgf-m, 3.6 ft. lbs.)

DISASSEMBLY





1. Remove the nut which holds the fan itself onto fan motor and shroud assembly.





2. Remove the bolts which install the fan motor onto shroud.

ASSEMBLY





Assemble in the reverse order of disassembly.
Tightening torque: 4.4 Nm (0.45 kgf-m, 3.3 ft. lbs.)





Tightening torque: 3.4 Nm (0.35 kgf-m, 2.5 ft. lbs.)