Camshaft Sprocket
Camshaft SprocketREMOVAL
1. Remove the V-belt.
2. Remove the crankshaft pulley.
3. Remove the timing belt cover.
4. Remove the timing belt assembly.
5. Remove the camshaft sprockets. To lock the camshaft, use ST.
ST 499207400 CAMSHAFT SPROCKET WRENCH
ST 499977500 CAMSHAFT SPROCKET WRENCH
INSTALLATION
1. Install the camshaft sprocket. To lock the camshaft, use ST.
NOTE: Do not confuse camshaft sprockets (RH) and (LH) during installation.
ST 499207400 CAMSHAFT SPROCKET WRENCH
Tightening torque: 30 Nm (3.1 kgf-m, 22.2 ft. lbs.)
ST 499977500 CAMSHAFT SPROCKET WRENCH
Tightening torque: 30 Nm (3.1 kgf-m, 22.2 ft. lbs.), and then tighten 45° furthermore
2. Install the timing belt assembly.
3. Install the timing belt cover.
4. Install the crankshaft pulley.
5. Install the V-belt.
INSPECTION
1. Check the sprocket teeth for abnormal wear and scratches.
2. Make sure there is no free play between sprocket and key.
3. Check the crankshaft sprocket notch used for sensor for damage and contamination of foreign matter.