Crankshaft, Engine

Crankshaft
Bend limit 0.035 mm (0.0014 inch)
Crank pin
Out-of-roundness 0.003 mm (0.0001 inch)
Cylindricality 0.004 mm (0.0002 inch)
Grinding limit (Diameter) 51.750 (2.0374) or less
Crank journal
Out-of-roundness 0.005 mm (0.0002 inch)
Cylindricality 0.006 mm (0.0002 inch)
Grinding limit (Diameter) 59.750 (2.354) or less
Crank pin outer diameter
STD 51.984-52.000 mm (2.0466-2.0472 inch)
0.03 mm (0.0012 inch) US 51.954-51.970 mm (2.0454-2.0461 inch)
0.05 mm (0.0020 inch) US 51.934-51.950 mm (2.0447-2.0453 inch)
0.25 mm (0.0098 inch) US 51.734-51.750 mm (2.0368-2.0374 inch)
Crank journal outer diameter
#1 - #5
STD 59.992-60.008 mm (2.3619-2.3625 inch)
0.03 mm (0.0012 inch) US 59.962-59.978 mm (2.3607-2.3613 inch)
0.05 mm (0.0020 inch) US 9.942-59.958 mm (2.3599-2.3605 inch)
0.25 mm (0.0098 inch) US 59.742-59.758 mm (2.3520-2.3527 inch)
Thrust clearance
STD 0.030-0.115 mm (0.0012-0.0045 inch)
Limit 0.25 mm (0.0098 inch)
Oil clearance
STD 0.010-0.030 mm (0.0004-0.0012 inch)
Limit 0.040 mm (0.0016 inch)