Removal and Installation
Front SeatREMOVAL
1. STANDARD SEAT
1. Disconnect ground cable from battery.
2. While pressing headrest lock button, remove headrest.
3. Tilt forward backrest.
4. Move seat to full front end.
5. Remove bolt cover at rear end of slide rail.
6. Disconnect connectors of seat heater and seat belt warning. (Seat heater equipped vehicle)
7. Remove two bolts at rear side of seat rail.
8. Move seat to full rear end.
9. Remove two bolts at front side of seat rail.
10. Remove front seat from vehicle.
CAUTION: When removing seat form vehicle, take care not to damage body, seat, or trim.
2. POWER SEAT
1. While pressing headrest lock button, remove headrest.
2. Tilt forward backrest.
3. Move seat to full front end.
4. Remove bolt cover at rear end of slide rail.
5. Remove two bolts at rear side of seat rail.
6. Move seat to full rear end.
7. Remove two bolts at front side of seat rail.
8. Disconnect ground cable from battery.
9. Disconnect connectors of seat heater and seat belt warning. (Seat heater equipped vehicle)
10. Remove front seat from vehicle.
CAUTION: When removing seat form vehicle, take care not to damage body, seat, or trim.
INSTALLATION
1. STANDARD SEAT
1. Install in the reverse order of removal.
2. Place slide rail rear inner on location bolts (A).
3. Tighten the four bolts of slide rail.
CAUTION: Confirm that seat can move smoothly and be locked securely at any position.
2. POWER SEAT
1. Install in the reverse order of removal.
2. Place slide rail rear inner on location bolts (A).
3. Tighten the four bolts of slide rail.
CAUTION: Confirm that seat can move smoothly.
Tightening torque: Refer to COMPONENT in General Description.
Front Seat Part 1:
Front Seat Part 2:
Torque specifications