Removal and Installation

Fuel Tank (Part 1):

Fuel Tank (Part 2):

Fuel Pump

REMOVAL

WARNING:
- Place "NO FIRE" signs near the working area.
- Be careful not to spill fuel.

NOTE: Fuel pump assembly consists of fuel pump and fuel level sensor.

1. Release fuel pressure.
2. Drain fuel from fuel tank.
3. Raise rear seat and turn floor mat up.




4. Remove access hole lid.




5. Disconnect connector from fuel pump.




6. Disconnect quick connector and then disconnect fuel delivery hose (A) and return hose (B).




7. Remove nuts which install fuel pump assembly onto fuel tank.
8. Take off fuel pump assembly from fuel tank.

INSTALLATION
Install in the reverse order of removal. Do the following:
1. Always use new gaskets.
2. Ensure sealing portion is free from fuel or foreign particles before installation.




3. Tighten nuts in alphabetical sequence shown in figure to specified torque.