Rear Quarter Trim

REAR QUARTER TRIM

REMOVAL

1. Remove the rear seat.
2. Remove the side sill rear cover.
3. Remove the rear rail trim (A).
4. Remove the strut cap.
5. Remove the shoulder anchor of rear seat belt.
6. Loosen the screws and clips to remove rear quarter upper trim (B).
7. Remove the rear skirt trim (C).
8. Loosen the screws and clips to remove rear quarter lower trim (D).






INSTALLATION

Install in the reverse order of removal.

CAUTION: Be sure to securely hook pawls of inner trim panel to body flange.

NOTE: When installing the rear quarter upper trim, be sure to set the rear mole as shown in the figure.