Automatic Transmission Dipstick - Dipstick Tube: Service and Repair

Oil Charger Pipe

REMOVAL





1. Remove the air cleaner case. non-turbo
2. Remove intercooler. Turbo Models
3. Remove the oil charger pipe, and remove the O-ring from the flange face.

INSTALLATION





1. Install the oil charger pipe with new O-ring.
Tightening torque: 41 Nm (4.2 kgf-m, 30.4 ft. lbs.)
2. Install the air cleaner case. non-turbo
3. Install intercooler. Turbo Models

INSPECTION
Make sure the oil charger pipe is not deformed or otherwise damaged.