Rear Wiper Arm
Rear Wiper ArmREMOVAL
1. Raise the wiper arm cover (A).
2. Remove the nut to remove wiper arm.
INSTALLATION
1. Install in the reverse order of removal.
2. Operate the rear wiper once.
3. Align the blade to rear defogger heat wire (A).
Tightening torque:
T1: 6.0 N.m (0.61 kgf-m, 4.4 ft-lb)
T2: 8.0 N.m (0.82 kgf-m, 5.9 ft-lb)