Clear Memory Mode

CLEAR MEMORY MODE
1. On the [[Main Menu]] display screen, select the {2. Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Transmission} and press the [YES] key.
3. Press the [YES] key after the {Center Differential Control} is displayed.





4. On the [[Transmission Diagnosis]] display screen, select the {Clear Memory} and press the [YES] key.
5. When Done and Turn ignition switch OFF are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.

NOTE: For details concerning operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.